KANOMAX 3443 Digital Dust Monitor - Manual (Page 37)

3. Display Description and operation Procedure
31
F) Pulse Output
With this instrument the pulse that corresponds to CPM value (instantaneous value) can be output.
Connect the output cable sold separately.
(1) Pulse Frequency Update Interval: The output data is updated every one second.
(2) Pulse Range:
0.0166 Hz – 166.6 Hz (1-10,000 CPM)
DUTY 50%
(3) Output Format, Spec: Photocoupler Output (no-voltage contact output: collector emitter)
Model: TLP127
Maximum Applied Voltage: DC300V
Maximum Current: 150mA
(4) Output Cable: Please purchase our optional output cable (3442-01).
Pulse Output Explanation
CPM (Instantaneous Value) Pulse Frequency
1 CPM 0.0166 Hz
60 CPM 1 Hz
600 CPM 10 Hz
6,000 CPM 100 Hz
10,000 CPM 166.6 Hz
* The pulse output is more than 1 CPM and the resolution is 1
CPM. When CPM is 0 CPM, there is no pulse output.
The pulse equivalent to the CPM
value (instantaneous value) is
output.
(Output Terminal Circuit)
G) Output Cable (3442-01) -external appearance-
This is the dedicated cable for analog output, pulse output and alarm output. This is an option at the time of
purchase only.
* The CPM value (instantaneous value) used for pulse output differs
from the COUNT value on the LCD display.
* Use the dedicated output cable (3442-01) sold separately.
＋
output
−
1000 mm 150 mm
Cable 1 Cable 2
Relay Connector
Bare crimping terminal – Y type (forM3)
Connector at the
dust monitor side
* Supplied as a set of cable 1
and cable 2.
Signal Name
Wiring Color ‐
Cable 2
Marking
Sig Red ANALOG ＋
Analog Output
GND Black ANALOG −
＋ White ALARM ＋
Alarm Output
− Blue ALARM −
＋ Yellow PULSE ＋
Pulse Output
− Green PULSE −