KANOMAX 3443 Digital Dust Monitor - Manual (Page 18)

3. Display Description and operation Procedure
12
3.4 MENU
Press [MENU] key on the initial screen to display the menu screen.
On the menu screen you can select the followings;
MODE:
Measurement Mode
To set a measurement mode => 3.4.1 Measurement Mode
CALCULATION: Calculation Mode
To set calculation mode and to start a measurement
=> 3.4.2 Calculation Mode
DATA DISPLAY
To display measurement data saved in the memory of the
instrument on the screen
=> 3.4.3 Data Display
DATA CLEAR
To delete measurement data saved in the memory of the
instrument
=> 3.4.4 Deleting Data
CALIBRATION
To perform background adjustment and sensitivity
adjustment
=> 3.4.5 Calibration
UTILITY
To perform cleaning and calibration and to configure each
setting
=> 3.4.6 Utility
[MENU] Key: To go back to the initial screen
[▲][▼] Key: To move the cursor up and down
[SET] Key: To display the screen that is indicated by the cursor
3.4.1 Measurement Mode
Select “MODE” on the menu screen to display the screen shown on the
left.
On this screen, select one measurement mode out of three options.
The options are;
STD.
SET: Standard Mode
FREE SET: Free Setting Mode
MANUAL: Manual Mode
Move the cursor up and down by using [▲] [▼] keys, and select the item
by pressing [SET] key.
* Please note that unless you press [SET] key when [SAVE INFO] is
pointed at by [►] on the setting screen of the each mode, setting will
not be saved.