KANOMAX 3443 Digital Dust Monitor - Manual (Page 36)

3. Display Description and operation Procedure
30
The range setting is also required in CPM mode as well.
Use [▲][▼] keys to move the cursor and select [SAVE INFO]. Then
press [SET] key.
The set value will be saved and the screen will go back to the UTILITY
screen.
(1) Data Update Interval: The output data is updated every one second.
(2) Effective Range of the Output: From when a measurement starts until the measurement finishes.
(3) Output Format, Spec:
Photocoupler Output (no-voltage contact output: collector emitter)
Model: TLP127
Maximum Applied Voltage: DC300V
Maximum Current: 150mA
(4) Output Cable: Please use the optional analog / alarm output cable (3442-01).
Alarm Output Explanation
Alarm is activated based on the
value of concentration (mg/m
3
or CPM).
(Output Terminal Circuit)
1 2 n n+1 n+2 n+3 n+4 n+5 n+6（Measurement Time）
CPM（ mg/m 3 )
* Use the dedicated output cable (3442-01) sold separately.
OF
＋
output
−
Finish
Start
ON
Alarm Setting
10000
9999
[▼] key to decrease ↓ ↑ [▲] key to increase
“AlarmOver ” will appear when measurement hits over the range