In-Situ Level TROLL 400/500/700/700H Operators Manual - Manual (Page 75)

1-800-446-7488 75 www.in-situ.com
Guidelines for Cleaning Returned Equipment
Please help us protect the health and safety of our employees by cleaning and
decontaminating equipment that has been subjected to potential biological or health
hazards, and labeling such equipment. Unfortunately, we cannot service your
equipment without such notification. Please complete and sign the form on page 76 (or
a similar statement certifying that the equipment has been cleaned and
decontaminated) and send it to us with each instrument.
l
We recommend the glassware cleaning product, Alconox, available from In-Situ
and from laboratory supply companies.
l
Clean all cables and remove all foreign matter.
l
Clean the cable connectors with a clean, dry cloth. Do not submerge the
connectors.
l
Clean the instrument including the nosecone, cable head, and protective caps.
If an instrument is returned to our Service Center for repair or
recalibration without a statement that it has been cleaned and
decontaminated, or if it is the opinion of our Service
Representatives that the equipment presents a potential health or
biological hazard, we reserve the right to withhold service until
proper certification is obtained.