In-Situ Level TROLL 400/500/700/700H Operators Manual - Manual (Page 20)

1-800-446-7488 20 www.in-situ.com
Communication Cables
The TROLL Com Communication Device provides an interface between the instrument
and a desktop/laptop PC or the RuggedReader Handheld PC for calibrating and
programming the instrument and for profiling and downloading data. The TROLL Com
Communication Device is offered in either a cable-connect or direct-connect
configuration including a 0.9 m (3 ft) vented polyurethane cable, external power input
jack, and vent with replaceable membrane.
Cable-Connect TROLL Com Communication Device
The Cable-Connect TROLL Com Communication Device connects to an instrument's
RuggedCable System and to a serial or USB port. This communication cable is
weatherproof and withstands temporary immersion in water (IP67 compliant).
1
RS232 TROLL Com, Cable-Connect, part number 0056140 (pictured) or USB
TROLL Com, Cable-Connect, part number 0052500
2 External power input
3 Vent
4 Twist-lock connector