GW Instek GDM-8246 Programming Manual - Manual (Page 20)

GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯ 38 ⎯
can be o(off) or 1(on).
Examples:
:CALCulation:MINimum? might return 1 in the MIN mode.
:CALCulation:MINimum 1 sets the MIN mode.
:CALCulation:RELation:STATe
Function:
Returns or sets the REL mode on or off.
Syntax:
:CALCulation:RELation:STATe?
:CALCulation:RELation:STATe
can be o(off) or 1(on).
Examples:
:CALCulation:RELation:STATe? might return 1 in the REL mode.
:CALCulation:RELation:STATe 1 sets the REL mode.
:CALCulation:RELation:DATa
Function:
Returns or sets the reference value in the REL mode.
Syntax:
:CALCulation:RELation:DATa?
:CALCulation:RELation: DATa
GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯ 39 ⎯
Examples:
:CALCulation:RELation:DATa? might return +1.0000 in DC voltage
function.
:CALCulation:RELation:DATa 1.0000 sets 1.0000 DC voltage at the
reference standard value.
Please refer to the unit for every range shown as Table 6-1.
:CALCulation:SDBM:STATe
Function:
Returns or sets the SDBM mode on or off.
Syntax:
:CALCulation:SDBM:STATe?
:CALCulation:SDBM:STATe
can be o(off) or 1(on).
Examples:
:CALCulation:SDBM:STATe? might return 1 in the dBm mode.
:CALCulation:SDBM:STATe 1 sets the dBm mode.
:CALCulation:REFerence:SDBM:REFerence
Function:
Returns or sets the reference impedance in the dBm mode.
Syntax:
:CALCulation:SDBM:REFerence?