GW Instek GDM-8246 Programming Manual - Manual (Page 18)

GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯ 34 ⎯
:READ? (query only)
Function:
Returns the value displayed on the primary and secondary display with
14 characters totally.
Syntax:
:READ?
Examples:
:READ? Might return “ NONE ,+0.0000” when the current function is in
the DC voltage.
:VALUE? (query only)
Function:
Returns the value displayed on the primary and secondary display with 7
characters totally.
Syntax:
:VALUE?
Examples:
:VALUE? might return “+0.0000” when the current function is in the DC
voltage.
:SVALue? (query only)
Function:
Returns the value displayed on the primary and secondary display with 6
characters totally.
GDM-8246 MULTIMETER
PROGRAMMER MANUAL
⎯ 35 ⎯
Syntax:
:SVALue?
Examples:
:SVALue? might return “ -OL- ” when the current function is in the dBm
mode.
:CALCulation:LIMit:STATe
Function:
Returns or sets the compare mode on or off.
Syntax:
:CALCulation:LIMit:STATe?
:CALCulation:LIMit:STATe
can be o(off) or 1(on)
Returns:
0/1
Examples:
:CALCulation:LIMit:STATe? might return 1 in the compare mode.
:CALCulation:LIMit:STATe 1 sets the compare mode.
:CALCulation:LIMit:LOWer
Function:
Returns or sets the value of the lower limit in the compare mode.
Syntax: