GW Instek GPI-700A Series Programming Manual User Manual

Page 20

GPI/GPT SERIES PROGRAMMABLE EST

PROGRAMMER MANUAL

⎯ 37 ⎯

:DCContinue:VOLTage?

Please refer to the specification

Return:

Examples:

:DCContinue:VOLTage 1.000 set the CDC test voltage to 1.000kV.

:DCContinue:VOLTage? Return 1.000 if the CDC test voltage setting is 1.000kV.

:DCContinue:CMINimum

Function:

Set or query the CDC test minimum current.

Syntax:

:DCContinue:CMINimum

:DCContinue:CMINimum?

Please refer to the specification

Return:

Examples:

:DCContinue:CMINimum 1.00 set the CDC test minimum current to 1.00mA.

:DCContinue:CMINimum? return 01.00 if the CDC test minimum current setting

is 1.00mA.

GPI/GPT SERIES PROGRAMMABLE EST

PROGRAMMER MANUAL

⎯ 38 ⎯

:DCContinue:CMAXimum

Function:

Set or query the CDC test maximum current.

Syntax:

:DCContinue:CMAXimum

:DCContinue:CMAXimum?

Please refer to the specification

Return:

Examples:

:DCContinue:CMAXimum 1.00 set the CDC test maximum current to 1.00mA.

:DCContinue:CMAXimum? return 01.00 if the CDC test maximum current

setting is 1.00mA.

:DCContinue:RTIMe

Function:

Set or query the CDC ramp time.

Syntax:

:DCContinue:RTIMe

:DCContinue: RTIMe?

Please refer to the specification

Return:

This manual is related to the following products: