GW Instek GDS-3000 Series Freewave User Manual - Manual (Page 9)

Installing Freewave
17
Next button to proceed.
4. Select the directory in which Freewave is to be installed. Click
Next.
• To change the directory, click on the Browse button and select
another directory from the directory map.
• To calculate the occupied space, click on the Disk Cost button. A
separate dialog box will appear, showing the disk space required
for Freewave and the entire space in the drive.
• To control the software accessibility, check “Everyone” or “Just
me”.
Freewave Manual
18
5. Click on the Next button again to start the installation.