GW Instek GDS-3000 Series Freewave User Manual - Manual (Page 22)

Using the Commands
43
Operation log Control panel
Date
Command
description
Command
move icon
Command
select icon
Selected
commands
Command
list
4. Click on the command category
to show each command
(example: voltage measurement
commands).
5. Click on a command and then click on the right
arrow to copy the command into the command
list (example: MEAS:SOUR command).
→ →
6. Repeat this until all commands are copied into
the command list.
Deleting a
command Click on a command in the command list and then
click on the left arrow. The command will be
deleted from the list.
→ →
Freewave Manual
44
Changing the
command order Click on a command in the command list and then
click on the up or down arrow. The command
changes its position in the list.
Moving a command (MEAS:SOUR) up
→ →
Moving a command (MEAS:SOUR) down
→ →