GW Instek GDS-3000 Series Freewave User Manual - Manual (Page 11)

Installing Freewave
21
4. Activate Freewave. If the oscilloscope ID appears on the screen,
Freewave is ready for operation.
5. If the oscilloscope ID does not appear in the initial
display, click on the Scan (binoculars) icon to
manually search for the oscilloscope. If this still
fails, follow the instructions in the next section,
“Manually Installing the USB Driver”.
Freewave Manual
22
Manually Installing the USB Driver
1. Open the Control Panel in the PC and activate the System icon.
2. Select Device manager.
In Windows XP, select the
Hardware tab and activate the
Device Manager. In Vista, select Device Manager
from the side menu.
A