Repairing/uninstalling freewave – GW Instek GDS-3000 Series Freewave User Manual User Manual
Page 13

Installing
Freewave
25
8. Select the directory where Freewave is installed and click on the
Next button. The USB driver “dso_vpo.inf” will be installed.
Click Next.
9. Check the Device Manager again. The oscilloscope should now
be recognized in the “Ports” node as DSO.
Freewave
Manual
26
Repairing/Uninstalling Freewave
After installing Freewave, repairing or uninstalling Freewave is
possible using the same setup.exe file used to install the program.
Repair
Repairs corrupted functions by reinstalling
Freewave. Select this function if Freewave starts
malfunctioning.
Remove
Uninstalls Freewave from the PC.
1. Acitvate the setup.exe. A dialog box will appear.
2. Select Repair or Remove and click on the Finish button. Repair or
removal starts and finishes automatically.
3. When it is completed, click on the Close button to complete the
procedure.