Printing out display contents – GW Instek GDS-3000 Series Freewave User Manual User Manual
Page 17

Monitoring the Oscilloscope
33
Taking a Video Clip of the Display
Contents(GDS-1000-U and GDS-1000A-U
only)
1. Make sure the oscilloscope’s display contents appear in the
Freewave screen, updated in real-time (Play mode).
2. Select the recording area by selecting either “Freewave Screen” or
“Oscilloscope Display” in the Video Recording Area panel.
3. Click on the Record button. Freewave
automatically starts recording the display contents.
4. To stop the recording, click on the Stop button
which will open a file save dialog box. Enter the file
name, select the directory, and save the video in the
*.wmv format.
Freewave
Manual
34
Printing Out Display Contents
1. Make sure the oscilloscope’s display contents appear in the
Freewave screen (both Play and Pause mode works fine).
2. Click on the Print button. A standard Windows
printout dialog box will appear.
3. Configure the printer and printout the oscilloscope
display contents.