Fire-Lite PS Tools MS-9600 - Manual (Page 31)

PS-Tools User Guide
636 Pt Addr. Panel
PS-Tools 04/2010 23
Selecting Configuration Type
To select a configuration type
1. Using the Find option in the initial screen, select a customer record. For more information, see
Finding a Customer .
2. Click Configure to program the fire panel settings. The Configuration Type dialog box
appears.
3. In the Select Configuration list, perform one of the following:
• Select the default option Factory Default, if you are configuring for the first time.
or
• Select a previously saved configuration which appears in the list.
4. Click OK. The System Info -> Communicator Settings -> Central Station pane appears (see
Figure 5-1 ).
Configuring System Info
In PS-Tools, configuring the system information involves the following steps.
1. Configuring the communicator settings (see Communicator Settings )
a. Central Station (see Central Station )
b. Primary Central Station (see Primary Central Station )
c. Secondary Central Station (see Secondary Central Station )
2. Configuring the input/output modules (see Configuring Input/Output
a. Relays (see Relay )
b. Zones (see Zones )
c. Special Zones (see Special Zones )
d. NACs (NAC 1, NAC 2, NAC 3, and NAC 4) (see NAC (Notification Appliance Circuits) )
3. Configuring the general system settings which include the timers, clock format, trouble
reminder, and other settings (see
Configuring General System Settings )
4. Configuring the Optional Modules (see Configuring Optional Modules )