Fire-Lite PS Tools MS-9600 - Manual (Page 29)

636 Pt Addr.Panel
PS-Tools 04/2010 21
5
5 Configuring Fire Panels
Using PS-Tools, you can configure the fire panel settings. Configuring a fire panel involves:
• Configuring the settings for input and output modules.
• Configuring the fire panel settings such as date and time, banner display, fire panel
passwords, and other panel settings.
• Configuring the SLC loop setup for the detectors and modules.
• Verifying the SLC loop setup.
• Simulating the setup to evaluate SLC loop.
• Modifying the customer details in the server.
• Migrating the configuration information from PK-Plus to PS-Tools database.
After you configure the fire panel settings, connect the computer to the fire panel and download the
configuration settings. In addition, you can upload the configuration information from the fire
panel, and view the fire alarm system settings in PS-Tools.
The following table describes the tasks you can perform using different sections of this chapter.
Section Description Refer to
Selecting Configura-
tion Type To select a configuration type in PS-Tools page 23
Configuring System
Info To configure the communicator settings,
input/output modules, optional modules
and the general system settings
page 23
SLC Loop Setup To add detectors and modules to the SLC
loop page 31
Save to Database To save the configuration in the PS-Tools
database page 49
Save as Template To save the configuration as a template page 50
Verify Setup To verify the SLC loop setup page 50
Simulation To view the zone correlations for the installed
devices to confirm the programming page 52
Upload Information To view the uploaded information from the
636 Pt Addr. panel page 55
Comparing Configura-
tion To compare the configuration for two differ-
ent customers page 58
Database Backup To save the database backup page 60
Database Restore To restore the database. page 61