Fire-Lite P K-411UD Windows-Based Off-Line Programming Utility - Manual (Page 36)

Customer
36 Document #50802 Rev.B 1/5/99 P/N 50802:B
Click the Save button to save all information programmed in this window and then click the Exit button. Clicking
the Exit button before clicking the Save button will close this window without saving the data entered in this window.
The Input/Output window will close and the Customer Files window, as illustrated in Figure 5-18, will reappear.
5.1.5.3 Input/Output Programming for the 411UDAC
Clicking the Input/Output button in the Customer Files window will cause the Input/Output window shown in
Figure 5-24 to appear.
Programming of each of the 4 channels and two output relays is accomplished through the Input/Output window. In
addition, options for NAC Coding, the AC Loss Delay Timer, Auto Silence and Restoral Method as well as the
settings for Trouble Reminder, Alarm Verification and Silence Inhibit are selected in this window.
FIGURE 5-23: 411UDAC Customer Files Window
FIGURE 5-24: Input/Output Window for the 411UDAC