2 constant power, 3 resettable power, 2 constant power -17 4.9.2.3 resettable power -17 – Fire-Lite MS-25E Addressable Fire Control Panel User Manual
Page 47: Onstant (see section 4.9.2.2), Esettable power (see section 4.9.2.3)
Control Panel Installation
53688
4-17
4.9.2.2 Constant Power
Use constant power for applications that require a constant auxiliary power source. Power is
always present at Constant circuits.
4.9.2.3 Resettable Power
Resettable power is typically used to power beam detectors, flame detectors and conventional
4-wire smoke detectors. For circuits selected as Resettable, 24 volt power is always present at
the terminals unless a system reset occurs. If a system reset occurs, power is disconnected
from the terminals for 30 seconds, then re-applied.
This manual is related to the following products: