Detcon 1600A-N1R - Manual (Page 7)

1600A-N1R
1600A-N1R Instruction Manual Rev. 0.1 Page 3 of 38
NOTE: The set-up configuration is fully field-programmable and can easily be executed by the user in
the field, refer to Section 4.0 Setup. Modifications to the set-up configuration are expected to take place
at the customer’s site due to requirement changes and/or system expansions.
2.3 Specifications
Capacity
User
Configurable
Up to 16 analog, switch or serial inputs (Model 1600A)
Inputs
Analog 4-20mA (DA-4 Modules)
Contact Closure (DI-4 Modules)
RS-485 Modbus™ RTU
Outputs
User
Configurable:
Form C Relay Contacts (RL-4 Modules)
4-20mA outputs (AO-4 Modules)
Standard: RS-485
Accuracy/Repeatability
Display: < 1% F.S.
DA-4: < 1% F.S.
AO-4: < 1% F.S.
Power Input
110-230VAC
20-30VDC
Power Consumption
Base 1600A Controller: 20 Watts at 24VDC
Total Power is dependent on number of I/O modules, number of gas sensors, and type of gas sensors
Total power of unit with I/O modules and gas sensors not to exceed 120 Watts
Display
5 inch diagonal Graphic Backlit LCD with Touch screen
Electrical Classification
NEMA 1 19 inch rack mount
Dimensions
10.5''W x 8''H x 14''D
Operating Temperature Range
0°C to +50°C
Warranty
One
year