DeFelsko PosiTector 100 v.4.0 - Manual (Page 6)

Page 6 100 Series
Safety, Care and Maintenance
Screen care
•
The LCD is protected by a solvent-resistant lens. Be careful not to scratch
this lens. Do not use ink pens or any other sharp object.
•
Take care not to break the glass lens. Do not subject the Model 100 to a
strong impact or to extreme temperatures.
•
We suggest cleaning the lens only with a soft dry cloth – such as a cloth
made for cleaning eyeglasses.
Cleaning the plastic Gage housing
•
Clean the plastic surfaces only with isopropyl alcohol (rubbing alcohol) and
a soft dry cloth. Take care when using other solvents. While the housing is
solvent resistant, the buttons are not.
Cables and ports
•
Keep the probe connected to the Gage even during long periods of power-
down.
•
Do not use cables that are frayed or otherwise damaged. Hold a cable only
by its connector – the plug, not the cord – when connecting or
disconnecting it.
•
Never force a connector into a port if the connector and port do not join
easily. Make sure that the connector matches the port and that it’s properly
aligned and undamaged before you attach it.
Heat, moisture, dust
•
Keep the Gage away from extreme heat. Don’t leave it on the dashboard or
in the trunk of a car or near a heater. Heat can damage the screen, the plastic
case and internal parts.
•
Don’t leave the Gage where it is extremely dusty, damp or wet. Dust and
moisture can damage the Gage and cause it to malfunction. The Gage is not
waterproof and may not be submerged.