DeFelsko PosiTector 100 v.4.0 - Manual (Page 35)

100 Series Page 35
Serial Communications Configuration
Existing communication software can be used, providing it can capture data
from a COM port. By selecting "PRINT ?" on the Gage MENU, your computer
will accept the measurements in the printer format.
8 bit words, no parity, 1 stop bit
9600 baud
XON-XOFF handshaking
The supplied serial cable is RJ45 to DB9 F
Pinout Description
2 TXD Transmit data (from Gage)
3 RXD Receive data (from PC or Printer)
5 GROUND
Available Options
Memory
This software feature enables the Gage to record measurements,
basic statistics and annotations by group. These values can be
downloaded to either a printer, data collector or computer.
Additionally, lists of user, part, application and batch names can
be uploaded into the Gage. PosiSoft software is supplied when
the Memory option is ordered.
HP IR Printer
A convenient, portable printer is available for use with Gages
having the Memory option. The Gage transmits data to this
battery operated printer through the infra-red port without
connectors or cables.
AC Adapter
Power normally comes from two ‘C’ alkaline batteries. An AC adapter is
available to supply continuous 7.5 volts DC power from an AC source. This is
handy when doing extensive testing in a lab environment where the Gage will
remain in one location. When the AC adapter is being used, the batteries should
remain in the Gage in case of a power interruption. Do not use any AC adapter
other than the approved model supplied by the manufacturer.
(Model SPU I5A-1-1)
Traceable Standards
Calibration standards are available for each particular probe.
(pg.24). They are ideal for ISO 9000 compliance and for
verifying the operation of your Gage.