DeFelsko PosiTector 100 v.4.0 - Manual (Page 21)

100 Series Page 21
Recording and Downloading Measurements
(available only on Gages with the Memory option)
The Model 100 can store measurement results for later downloading to a printer,
datacollector or PC. These values are stored in the currently selected application,
grouped by batch (file). These batches are unique to an individual application
and an application can have many batches.
Creating Batches
•
To begin recording measurements into a new file choose the
Batch q
q Create New menu option.
•
To begin recording measurements into an existing file choose the
Batch q
q Select menu option.
•
To stop or resume recording, select the
Modes q
q Memory ON/OFF
menu option
The following symbols appear in the LCD status bar when recording is in
progress:
In this example, Batch_3 has been created but there are currently no recorded
measurements in that batch. The counter (n=0) is incremented every time a new
measurement or average value from a “set” is added to the batch.
New batch names are created sequentially regardless of application. If a batch
name is deleted it is not re-created. This sequencing is only restarted when the
Gage is INITIALIZED (pg.31).
Annotating Batches
Part and user names can be attached to batches.
These names are selected from list boxes created
on a PC using the supplied PosiSoft software
(pg.34) and uploaded into the Gage. These names
appear on printouts and with downloaded
measurements. There are no functions such as
sorting applied to these names. They serve only to
provide additional information and organization.