DeFelsko PosiTector 6000 v.4.0 - Manual (Page 5)

5
Golden Rule
Measure your uncoated part first!
This quick zero-check determines if any
adjustment is needed for your particular
substrate. Zeroing compensates for
deviations in shape, diameter,
composition, roughness, etc.
Menu Operation
Gage functions are menu controlled, by
two menus, the Main Menu (see p.6) and
the Config Menu (see p.7). The Main
Menu is used to turn the features and
special functions of the gage on or off.
The Config Menu is used to change basic
gage configuration settings, such as the
displayed language, power-down interval,
and displayed resolution.
To access the Main Menu, turn the gage
on and press 8 8 9 9 simultaneously to
display the first menu choice.
To access the Config Menu, allow the
gage to power-down. While the gage is
off, press 8
8 9 9 simultaneously and hold
for 3 seconds to display the first menu
choice.
In both menus,
•
To answer "YES" press 9 9 and the
current choice will be selected.
•
To answer "NO" press 8 8 and the next
option will be displayed.
After the last Main Menu option, the Gage
re-displays the last measurement. After
the last Config Menu option the gage
powers down.