DeFelsko PosiTector 6000 v.4.0 - Manual (Page 16)

16
Slow-off / Fast-off
(Config Menu)
Standard (2) and Memory (3) models only
When
SLOWOFF? SLOWOFF? is selected the gage
powers-down after approximately 30
minutes of no activity, or when
OFF? OFF? is
selected from the Main Menu (see p.6).
When
FASTOFF? FASTOFF? is selected the gage
powers-down after approximately 60
seconds of no activity. This is the default
factory setting.
Hi-Resolution Mode
(Config Menu)
Standard (2) and Memory (3) models only
When
HIGHRES? HIGHRES? is selected, the
displayed gage resolution becomes as
follows:
Resolution Range
0.01 mil 0.00 – 99.00 mils
0.1 mil 100.0 – 999.9 mils
0.1
µ
m 0.0 – 999.9
µ
m
0.01 mm 1.00 – 99.99 mm
When
LOW RES? LOW RES? is selected, H
I -
R ESOLUTION Mode is deactivated and the
gage resolution is returned to the default
factory setting.
NOTE: Gage accuracy is not affected by
the H I -R ESOLUTION Mode.
Lock Mode
(Config Menu) - One-point Optimization Probes only
Standard (2) and Memory (3) models only
The
LOCK? LOCK? Menu option locks the 88 99
buttons. This prevents accidental
adjustments to readings when you have
set the gage up for a specific application.
Select
UNLOCK? UNLOCK? to unlock the
buttons. This is the default factory setting.