DeFelsko PosiTector 6000 v.4.0 - Manual (Page 23)

23
Downloading
Downloading Measurements As
They Are Taken
If a serial printer, data collector or
computer is connected to the Gage using
the supplied RS232 serial cable, readings
are immediately sent to the device as
they are taken. Output is in the following
form (example):
{STX} 15.0mil NONFE{CR}{LF}
where:
STX = ASCII code 02 = ^B
CR = ASCII code 13 = ^M
LF = ASCII code 10 = ^J
Downloading Measurements
Stored In Memory
Measurements stored in the Gage’s
memory can be downloaded to a
computer using an RS232 serial
communication cable and either the
PosiSoft software included with all
Memory(3) gages, or other types of
communications software (see below).
Measurements are not erased from
memory after downloading.