DeFelsko PosiTector 6000 v.4.0 - Manual (Page 25)

25
Available Options
HP IR Printer
A convenient, portable printer is available
for use with Memory models. The
Gage transmits data to this
battery-operated printer
through the infrared port
without connectors or
cables.
Traceable Standards
Calibration standards are available for
each particular probe.
They are ideal for ISO
9000 compliance and for
verifying the operation of
your Gage.
Plastic Shims
A set of five Plastic Shims is included.
They provide a quick operational check
and to help insure proper use of the Gage
by performing practice measurements. In
addition, they can be used to protect the
probe when measuring on tacky, rough or
hot surfaces. See your dealer to order
more Plastic Shims.
User Mode
The User Mode enables a user to load
customizable and pre-configured
calibration data into the Gage for
measuring specialty coatings such as
ferrous-loaded paints.
This mode is not found on 6000 Gages
unless it is specifically requested at the
time the Gage is ordered.
Please contact your dealer for more
information on this option if your
application requires such capability.