Returning the gage for service – DeFelsko PosiTector 6000 v.4.0 User Manual
Page 29

29
Returning the Gage for Service
Before returning the Gage for service…
1. Install new Alkaline batteries.
2. Examine the probe tip for dirt or
damage. Constant-pressure probes
should move up and down freely.
3. Perform a gage
XRESET
XRESET.
4. Place a plastic shim onto bare metal
(steel or non-steel, depending upon
whether you have an “F” or “N”
probe) and attempt a measurement.
If you must return the Gage for service,
describe the problem fully and include
measurement results, if any. Be sure to
also include the probe, your company
name, company contact, telephone
number and fax number.