Printing partial results, 4 assigning patient, Checking data connection – Seca 515 User Manual
Page 35
Operation • 35
English
2. Press the suitable PAL value for your patient.
The list is closed.
The value appears in the input field.
3. Press the
confirm
button.
– If you have not yet measured the weight and height, the
weight/
height
tab is active.
– If you have not yet assigned a patient, the
patient
tab is active.
– If all data are available, the
analysis
tab is active.
ATTENTION!
Data loss
If there is no new entry for approx. 5 minutes, the current
measurement is discarded. The complete measurement procedure
must be repeated.
Printing partial results
If the device is connected to a
seca 360°
wireless printer, you can print the
measured results directly.
1. Ensure that the
seca 360°
wireless printer is switched on and that
there is a
seca 360°
wireless connection.
The printer symbol on the touchscreen display turns white.
NOTE:
If you uncertain of whether there is a
seca 360°
wireless connection,
contact your administrator or hospital technician.
2. Press the
change menu
button.
The secondary menu appears.
3. Press the
button.
All measured results and entries available to this point are printed.
7.4
Assigning patient
Checking data connection
♦ Ensure that you can access the seca patient database in one of the
following ways:
– The PC with PC software
seca 115
is switched on and connected
to the device via seca wireless network or Ethernet. The
corresponding data connection symbol turns white.
– The USB memory stick with seca patient database is connected
to the touchscreen display USB interface. The corresponding
data connection symbol turns white.