Seca 515 - Manual (Page 34)

34 •
As soon as the measurement ends, the message End of measurement
appears.
5. Press the continue button.
Entering the PAL value The Module-specific entries dialog window appears following a completed
BIA measurement. Enter the PAL value (PAL = Physical Activity Level)
here. Proceed as follows:
NOTE:
The
Module-specific entries dialog window does not appear if the
Energy evaluation module was deactivated in the module selection
(see “Checking the module selection” on page 31) or in the
standard module selection (see “Creating standard module
selection” on page 62).
1. Press the information button next to the PAL input field.
A list with typical PAL values and brief descriptions appears.
Screen still m issing.