LT Security LTD7708 - Manual (Page 7)

7
7 INSTRUCTION MANUAL
2. DEVICE OPERATION MANUAL
In device operation, the enter key on remote control has the same function as left
click of the mouse.
2.1 REMOTE CONTROL
The remote control is the secondary input device
For navigating the system‟s interface.
To use the remote control:
1.
STANDBY: Press to turn standby mode ON/OFF.
2. LOGIN/LOCK: If "Security" has been enabled in the
Setup menu, press to open the user password login
screen.
3.
Number/Channel buttons: While in menus,
press buttons 0~9 to enter values; during live
viewing, press to view channels in full-screen.
4.
: Press to switch between quad and
split-screen displays.
5.
MENU: Opens the main menu.
6. PTZ: Press to open the PTZ control window.
7. EXIT: Close menu windows.
8. Navigation/OK:
• : Move cursor in menus up;
• : Move cursor in menus right;
• : Move cursor in menus left;
• : Move cursor in menus down;
• OK: In menus, press to confirm selections; during
playback and preview, press to view system
information
9.
+/ - : In menus, press to adjust values.
10. RECORD: Press to start manual recording.
11. STOP: Press to stop manual recording.
12. EXTRA: For the future use.
13. Playback controls:
• : Increase reverse playback speed 1X, 2X, 4X
• : Press to start playback
• : Press to increase forward playback speed 1X, 2X, 4X
• : Press to slow playback speed by 1/2, 1/4, 1/8
• : Press to freeze playback to one frame, then press again to advance frame-by-frame
TIP: When using the remote
control to enter password and
camera titles, select the field
using the navigation buttons,
press ENTER, and then press
the number buttons.