LT Security LTD7708 - Manual (Page 21)

21
21 INSTRUCTION MANUAL
Daylight Savings Time
To set daylight savings time:
1) Under DST, select ON. DST options appear.
2) Under DST MODE select one of the following:
• CUSTOM: Set customized start and end times for DST (go to step 4)
• DEFAULT: The Default setting will apply DST from the second Sunday of
March to the second Sunday in November (go to step 3)
3) If using the DEFAULT, click APPLY.
4) If setting a CUSTOM DST, use the drop-down menus to select a week and
month for the start and end times.
5) Click APPLY. Click CLOSE in the confirmation window.
6) Click EXIT in each menu until all windows are closed.tem date via numeric key.
8 PASSWORD
When you first startup your system, you are technically logged in as the ADMIN under
Device ID000000. The system employs two user authorities connected to a Device ID.
The authorities are as follows:
• ADMIN—administrator: Has full control of the system, and can change both
administrator and user passwords and enable/disable password checking
• USER—normal user: Only has access to live viewing, search, playback, and other
limited authorities. For security reasons, it is highly recommended to enable passwords on
your system. If you enable passwords, you must select a 6-digit USER password and a
6-digit ADMIN password.
ATTENTION : By default, passwords are disabled on the system. You will not need a
password to log in or access menus. You will not need a password to access your system
using the browser-based remote software.
Figure 2.4.2.8 password
You can change the Device ID and password of the ADMIN and the USER from the
Password menu.
To open the Password/security menu:
1）Right-click anywhere onscreen to open the Sub-Menu and select MAIN MENU.
2）Click BASIC. The Basic Setup Menu opens.
3）Click PASSWORD. The Password/Security menu opens.
To change your Device ID and Password: