LT Security LTD7708 User Manual

Page 19

INSTRUCTION MANUAL

your current record settings

•

OVERWRITE: Select ENABLE or DISABLE. If Overwrite is enabled, the system

will record over the oldest video data once the HDD is full. If Overwrite is disabled,
the system will stop recording once the HDD is full and the "FULL" LED on the
front panel of the system will light up.

Formatting the Hard Drive

ATTENTION: Formatting the HDD will erases all video data. This step cannot be
Undone.

Formatting the USB Flash Drive

Use a USB flash drive to backup recorded video and upgrade the system`s firmware.

You should always format the USB flash drive you intend to use with the system.
NOTE: Not formatting the USB flash drive may result in improper functionality.
5 BASIC

Set the system language, date and time, passwords, and configure audio and

display options.

The Basic Setup menu contains the following sub-menus:

Language, Date/Time,

Password, Display, and Video/Audio.

Figure 2.4.2.5 Basic Setup menu

This manual is related to the following products:

LTD7764