LT Security LTD7708 - Manual (Page 31)

31
31 INSTRUCTION MANUAL
Figure 2.4.2.18.2 PPPoE
3） If you selected STATIC in step 1, enter your IP Address, Net mask, and
Gateway in the respective fields using the Virtual Keyboard.
NOTE: The default IP address of the system is 192.168.3.97
4） If necessary, change the Media and Web Ports.
NOTE: For added security, we strongly recommend changing Web port 80 on the system
to any desired port not blocked by your Internet service provider (ISP). Please note
however, that you will also need to update the Web port in your browser and open this
new port in your router.
5） Click APPLY. Click CLOSE in the confirmation window.
6） Click EXIT in all menus until all windows are closed. The system restarts
automatically.
Manual DNS
Enter the
Primary or Secondary DNS from your router. This is required for DDNS to
function properly.
To obtain your Primary or Secondary DNS:
1) In your web browser, log in to your router using its Default Gateway address.
NOTE: Refer to your router`s manual or software for login information. You can also get
the Default Gateway on your PC by selecting Start>Run. Type
CMD and press Enter. In
the Command Prompt window type ipconfig and press Enter.
2) View its WAN settings. Enter the Primary or Secondary DNS address in the
MANUAL DNS field on your system.