LT Security LTD7708 User Manual

Page 24

INSTRUCTION MANUAL

11 ADVANCE

Use the Advanced Setup menu to configure alarm settings, motion detection,

mobile surveillance, PTZ settings and network settings. The Advanced Setup menu
contains the following sub-menus:

Alarm, Info, MD, Mobile, System, PTZ, and Network.

Figure 2.4.2.11 Video/Audio menu

12 ALARM

Use the Alarm menu to configure alarm and email settings.

NOTE: External alarm devices must be connected to the alarm block on the rear panel of
the system in order to use the I/O (input/ output) alarms of the system.

Figure 2.4.2.12.1 Alarm setup menu

To configure alarm settings:

1） Under I/O CHANNEL, select

NO (Normal Open), NC (Normal Closed), or OFF.

Click

NEXT PAGE to view additional channels (8-channel models only).

2) Apply loss alarms to the following:

•

HDD LOSS: The alarm will sound if the internal HDD is damaged

•

HDD SPACE: The alarm will sound when the HDD is full (overwrite must be

disabled)
•

VIDEO LOSS: The alarm will sound when a camera is disconnected

3) Under ALARM MANAGE, configure the following:

•

OUTPUT: Set the output time (in seconds) on the spot monitor from 0s, 10s,

This manual is related to the following products:

LTD7764