LT Security LTD7708 - Manual (Page 34)

34
34 INSTRUCTION MANUAL
3.2 USING REMOTE SURVEILLANCE
With your system connected to your local area network, you can now log in to your
system using Internet Explorer.
NOTE: Your system must be connected to your local or wide area network before
attempting remote access.
Logging In to Your System
With your IP address, you can now log in to your system over your local or wide area
network.
NOTE: You must configure DDNS settings locally.
To access your system:
1） Open Internet Explorer. In the address bar, enter the IP address of your system
(i.e. 192.168.3.97).
2） You must install the ActiveX® in order to access your system. Click the attention
bar at the top of the main page and select Install ActiveX Control. DVR Net
viewer will reset.
Figure 3.2.1 Click the ActiveX attention bar
3） In the warning box click Install. The login page appears.
4） Leave the password field blank (default).
NOTE: If you have enabled passwords on your system, enter your USER or ADMIN
password. However, only the ADMIN can change settings and options on the system.
5） Select LAN or INTERNET from the drop-down menu and click LOGIN. The
process will last for 1~2 minutes.
Figure 3.2.2 Remote access login screen