LT Security LTD7708 - Manual (Page 15)

15
15 INSTRUCTION MANUAL
3 RECORD MODE
Configure record parameters, enable/disable audio.
NOTE: Audio capable cameras (not included) are required for audio recording.
Figure 2.4.2.3.1 Record (DVR-4CH)
Figure 2.4.2.3.2 Record (DVR-8CH)
To configure recording options:
1) Under CHANNEL, use the drop-down menus and select ON/OFF to
enable/disable recording from the selected channel.
2) Under RESOLUTION, select HIGHEST, HIGH, or NORMAL.
DVR-4CH: Setup resolution and code rate for recording, there are three options:
HIGHEST,HIGH,NORMAL, corresponding to
D1、HD1、CIF resolution.
NOTE：PAL: D1@6fps, HD1@12FPS, CIF@24fps;
NTSC: D1@7fps, HD1@15FPS, CIF@30fps;
DVR-8CH：There is no RESOLUTION option, Only CIF resolution.
3） Under QUALITY.
DVR-4CH：Select BEST,FINE, NORMAL, Setup code rate for recording,
CIF: corresponding to 384Kbps and 512Kbps and 768Kbps.
HD1: corresponding to 512Kbps and 768Kbps and 1024Kbps.
D1: corresponding to 512Kbps and 768Kbps and 1024Kbps.
DVR-8CH: Select HIGHEST, HIGH, or NORMAL, Setup code rate for recording,
corresponding to 384Kbps、512Kbps and 768Kbps.