Brocade FICON Administrator’s Guide (Supporting Fabric OS v7.3.0) - Manual (Page 31)

Fabric OS commands related to FICON (Continued) TABLE 1
Command Description
portSwap Swaps ports. Note that the portswap --restore
command restores swapped ports to an unswapped
state.
portSwapDisable Disables the portSwap feature. The portSwap
command cannot be used after this feature is
disabled. The disabled state is persistent across
reboots and power cycles. Enabling or disabling the
portSwap feature does not affect previously
performed portSwap operations.
portSwapEnable Enables the portSwap feature.
portSwapShow Displays information about swapped ports.
supportShowCfgEnable ficon Turns on logging of FICON information on the switch.
Commands specific to FICON
ficonClear rlir Removes all RLIR records from the local RLIR
database.
ficonClear rnid Removes all outdated RNID records from the local
RNID database.
ficonCfg --set LIRR portnumber Sets the current LIRR device port number persistently.
ficonCfg --reset LIRR portnumber Clears the currently configured LIRR port number.
ficonHelp Displays a list of FICON support commands.
ficonCupSet fmsmode enable | disable |reset Enables, disables, or resets FICON Management
Server (FMS) mode.
CAUTION
Use the
ficonCupSet fmsmode reset option
only under direction from technical support
personnel. Indiscriminate use can disrupt CCW
processing and create errors at the host.
ficonCupSet modereg bitname 0 | 1 Sets FICON-CUP mode register bits.
ficonCupSet MIHPTO seconds Sets missing interrupt handler primary timeout
(MIHPTO) values.
ficonCupSet CRP PID CHID Sets the current reporting path (CRP).
ficonCupShow DD_LOG Displays the log information associated with the last
diagnostic command processed by the CUP.
Introducing FICON
FICON Administrator's Guide 29
53-1003144-01