Brocade FICON Administrator’s Guide (Supporting Fabric OS v7.3.0) - Manual (Page 110)

Example scripts for binding ports
The following example scripts containing the portAddress --bind command bind all ports on the DCX
Backbone to sequential, zero based (Mode 1) addresses. You can copy and paste these scripts
directly into a Telnet Fabric OS command line session. If a port does not exist, an error message will
be reported, but this has no effect.
date
# Slot 1
portaddress --bind 1/0 0000
portaddress --bind 1/1 0100
portaddress --bind 1/2 0200
portaddress --bind 1/3 0300
portaddress --bind 1/4 0400
portaddress --bind 1/5 0500
portaddress --bind 1/6 0600
portaddress --bind 1/7 0700
portaddress --bind 1/8 0800
portaddress --bind 1/9 0900
portaddress --bind 1/10 0A00
portaddress --bind 1/11 0B00
portaddress --bind 1/12 0C00
portaddress --bind 1/13 0D00
portaddress --bind 1/14 0E00
portaddress --bind 1/15 0F00
portaddress --bind 1/16 1000
portaddress --bind 1/17 1100
portaddress --bind 1/18 1200
portaddress --bind 1/19 1300
portaddress --bind 1/20 1400
portaddress --bind 1/21 1500
portaddress --bind 1/22 1600
portaddress --bind 1/23 1700
portaddress --bind 1/24 1800
portaddress --bind 1/25 1900
portaddress --bind 1/26 1A00
portaddress --bind 1/27 1B00
portaddress --bind 1/28 1C00
portaddress --bind 1/29 1D00
portaddress --bind 1/30 1E00
portaddress --bind 1/31 1F00
# Slot 2
portaddress --bind 2/0 2000
portaddress --bind 2/1 2100
portaddress --bind 2/2 2200
portaddress --bind 2/3 2300
portaddress --bind 2/4 2400
portaddress --bind 2/5 2500
portaddress --bind 2/6 2600
portaddress --bind 2/7 2700
portaddress --bind 2/8 2800
portaddress --bind 2/9 2900
portaddress --bind 2/10 2A00
portaddress --bind 2/11 2B00
portaddress --bind 2/12 2C00
portaddress --bind 2/13 2D00
portaddress --bind 2/14 2E00
portaddress --bind 2/15 2F00
portaddress --bind 2/16 3000
portaddress --bind 2/17 3100
portaddress --bind 2/18 3200
portaddress --bind 2/19 3300
portaddress --bind 2/20 3400
portaddress --bind 2/21 3500
portaddress --bind 2/22 3600
portaddress --bind 2/23 3700
portaddress --bind 2/24 3800
portaddress --bind 2/25 3900
portaddress --bind 2/26 3A00
portaddress --bind 2/27 3B00
portaddress --bind 2/28 3C00
portaddress --bind 2/29 3D00
portaddress --bind 2/30 3E00
portaddress --bind 2/31 3F00
Example scripts for binding ports
108 FICON Administrator's Guide
53-1003144-01