System logging, System log server table – Brocade 6910 Ethernet Access Switch MIB Reference User Manual
Page 87
Brocade 6910 Ethernet Access Switch MIB Reference
75
53-1002652-02
12
System logging
System logging
The objects in this section manage system logging functions (Syslog) using SNMP.
System log server table
The System Log (Syslog) Server Table shows which servers will receive Syslog messages. Every
server in this table will receive all Syslog messages.
snIfOpticalMonitoringTxPower
brcdIp.1.1.3.3.6.1.2
Syntax: DisplayString
Read only
This object holds the value of the transmitter optical signal
power for the interface, measured in dBm, followed by
whether this is a normal value, or high/low warning or alarm.
snIfOpticalMonitoringRxPower
brcdIp.1.1.3.3.6.1.3
Syntax: DisplayString
Read only
This object holds the value of the receiver optical signal
power for the interface, measured in dBm, followed by
whether this is a normal value, or high/low warning or alarm.
snIfOpticalMonitoringTxBiasCurrent
brcdIp.1.1.3.3.6.1.4
Syntax: DisplayString
Read only
Tx Bias Current. It is measured in mA, and is followed by
whether this is a normal value, or high/low warning or alarm.
Name, Identifier, and Syntax
Access
Description
Name, Identifier, and Syntax
Access
Description
brcdSysLogServerTable
brcdIp.1.1.11.1.1.1
N/A
System Log Server Table
brcdSysLogServerEntry
brcdIp.1.1.11.1.1.1.1
N/A
A row in the System Log Server table
brcdSysLogServerAddrType
brcdIp.1.1.11.1.1.1.1.1
N/A
The System Log server address type. The supported address
types are:
•
ipv4(1)
•
ipv6(2)
•
ipv6z(4)
Default: IPv4
brcdSysLogServerAddr
brcdIp.1.1.11.1.1.1.1.2
N/A
IP address of System Log server.
brcdSysLogServerUDPPort
brcdIp.1.1.11.1.1.1.1.3
N/A
UDP port number of the System Log server.
brcdSysLogServerRowStatus
brcdIp.1.1.11.1.1.1.1.5
Read/create
Controls the management of the table rows.
Setting this object to createAndGo(4) adds new row. Setting
this object to destroy(6) deletes a row. The value active(1) is
returned for get and get-next requests.
Other values in the enumeration are not used.