Brocade 6910 Ethernet Access Switch MIB Reference User Manual
Page 37
Brocade 6910 Ethernet Access Switch MIB Reference
25
53-1002652-02
3
Performance Monitoring of Loss Measurement Objects
mefSoamLmCurrentStatsForwardM
inFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.7
Syntax: Unsigned32
Read-only
This attribute contains the minimum one-way frame loss
ratio in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
mefSoamLmCurrentStatsForwardM
axFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.8
Syntax: Unsigned32
Read-only
This attribute contains the maximum one-way frame loss
ratio in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
mefSoamLmCurrentStatsForwardA
vgFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.9
Syntax: Unsigned32
Read-only
This attribute contains the average one-way frame loss ratio
in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
mefSoamLmCurrentStatsBackward
TransmittedFrames
1.3.6.1.4.1.15007.1.3.1.2.3.1.12
Syntax: Gauge32
Read-only
This attribute contains the number of frames transmitted in
the backward direction by this MEP.
This attribute only applies when mefSoamLmType is lmLmm
or lmSlm.
mefSoamLmCurrentStatsBackward
ReceivedFrames
1.3.6.1.4.1.15007.1.3.1.2.3.1.13
Syntax: Gauge32
Read-only
This attribute contains the number of frames received in the
backward direction by this MEP. This attribute only applies
when mefSoamLmType is lmLmm or lmSlm.
mefSoamLmCurrentStatsBackward
MinFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.14
Syntax: Unsigned32
Read-only
This attribute contains the minimum one-way frame loss
ratio in the backward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
This attribute only applies when mefSoamLmType is lmLmm
or lmSlm.
mefSoamLmCurrentStatsBackward
MaxFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.15
Syntax: Unsigned32
Read-only
This attribute contains the maximum one-way frame loss
ratio in the backward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
This attribute only applies when mefSoamLmType is lmLmm
or lmSlm.
mefSoamLmCurrentStatsBackward
AvgFlr
1.3.6.1.4.1.15007.1.3.1.2.3.1.16
Syntax: Unsigned32
Read-only
This attribute contains the average one-way frame loss ratio
in the backward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).
Units are in percent, where 1 = 1/100000.
This attribute only applies when mefSoamLmType is lmLmm
or lmSlm.
Name, Identifier, and Syntax
Access
Description