Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 35)

Brocade 6910 Ethernet Access Switch MIB Reference 23
53-1002652-02
3
Performance Monitoring of Loss Measurement Objects
mefSoamLmCfgStopTimeType
1.3.6.1.4.1.15007.1.3.1.2.1.1.20
Syntax: Integer Read-create This attribute specifies the type of stop time to terminate the
SOAM LM session. Only the stop time type ‘relative’ is
supported. The value of relative stops the SOAM LM session
when the session has been active for the time indicated by
mefSoamLmRelativeStopTime. If the value of the
mefSoamLmRelativeStopTime object is '0' the SOAM LM
session stops immediately.
mefSoamLmCfgRelativeStopTime
1.3.6.1.4.1.15007.1.3.1.2.1.1.22
Syntax: TimeInterval Read-only This attribute specifies the relative stop time, from the
session start time, to stop the SOAM LM session.
The value is (mefSoamLmCfgInterval * 5 [default
transmitting count])/10 => unit is 0.01 sec
mefSoamLmCfgSessionStatus
1.3.6.1.4.1.15007.1.3.1.2.1.1.29
Syntax: TruthValue Read-only This object indicates the current status of the LM session. A
value of 'true' indicates the current LM session is active. A
value of 'false' indicates the current LM session is not active,
has not started yet, or is currently in the stopped state
between periods of activity. A session can become inactive
due to it stopping based upon the stop time or the session
being disabled.
mefSoamLmCfgHistoryClear
1.3.6.1.4.1.15007.1.3.1.2.1.1.30
Syntax: TruthValue Read-create This object when written clears the Loss Measurement
history Table (mefSoamLmHistoricStatsTable) - all rows are
deleted. When read the value always returns 'false'. Writing
this value does not change the current stat table, nor any of
the items in the configuration table. Writing this object at row
creation has no effect.
mefSoamLmCfgRowStatus
1.3.6.1.4.1.15007.1.3.1.2.1.1.31
Syntax: RowStatus Read-create The status of the row.
If the MAC address of the destination MEP is not learned, the
command will fail.
When creating a row, use createAndWait(5), and then read
will show notReady(3).
According to MEF36, the writable columns in a row cannot be
changed if the row is active, except for
mefSoamLmCfgEnabled and mefSoamLmCfgHistoryClear
objects. All columns must have a valid value before a row can
be activated.
Start to transmit LMM after setting to active.
Name, Identifier, and Syntax Access Description