Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 39)

Brocade 6910 Ethernet Access Switch MIB Reference 27
53-1002652-02
3
Performance Monitoring of Loss Measurement Objects
mefSoamLmHistoricStatsEndTime
1.3.6.1.4.1.15007.1.3.1.2.4.1.2
Syntax: DateAndTime Read-only The time that the measurement interval ended. This object
applies regardless of the value of mefSoamLmType.
mefSoamLmHistoricStatsElapsedTi
me
1.3.6.1.4.1.15007.1.3.1.2.4.1.3
Syntax: TimeInterval Read-only The length of time that the measurement interval ran for, in
0.01 seconds.
This object applies regardless of the value of
mefSoamLmType.
mefSoamLmHistoricStatsSuspect
1.3.6.1.4.1.15007.1.3.1.2.4.1.4
Syntax: TruthValue Read-only Whether the measurement interval has been marked as
suspect.
mefSoamLmHistoricStatsForwardTr
ansmittedFrames
1.3.6.1.4.1.15007.1.3.1.2.4.1.5
Syntax: Gauge32 Read-only This attribute contains the number of frames transmitted in
the forward direction by this MEP.
mefSoamLmHistoricStatsForwardR
eceivedFrames
1.3.6.1.4.1.15007.1.3.1.2.4.1.6
Syntax: Gauge32 Read-only This attribute contains the number of frames received in the
forward direction by this MEP.
mefSoamLmHistoricStatsForwardM
inFlr
1.3.6.1.4.1.15007.1.3.1.2.4.1.7
Syntax: Unsigned32 Read-only This attribute contains the minimum one-way frame loss
ratio in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).Units are in percent, where 1 =
1/100000.
mefSoamLmHistoricStatsForwardM
axFlr
1.3.6.1.4.1.15007.1.3.1.2.4.1.8
Syntax: Unsigned32 Read-only This attribute contains the maximum one-way frame loss
ratio in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).Units are in percent, where 1 =
1/100000.
mefSoamLmHistoricStatsForwardA
vgFlr
1.3.6.1.4.1.15007.1.3.1.2.4.1.9
Syntax: Unsigned32 Read-only This attribute contains the average one-way frame loss ratio
in the forward direction calculated by this MEP for this
measurement interval. The FLR value is a ratio that is
expressed as a percent with a value of 0 (ratio 0.00) through
100000 (ratio 1.00).Units are in percent, where 1 =
1/100000.
mefSoamLmHistoricStatsBackward
TransmittedFrames
1.3.6.1.4.1.15007.1.3.1.2.4.1.12
Syntax: Gauge32 Read-only This attribute contains the number of frames transmitted in
the backward direction by this MEP. This attribute only
applies when mefSoamLmType is lmLmm or lmSlm.
mefSoamLmHistoricStatsBackward
ReceivedFrames
1.3.6.1.4.1.15007.1.3.1.2.4.1.13
Syntax: Gauge32 Read-only This attribute contains the number of frames received in the
backward direction by this MEP. This attribute only applies
when mefSoamLmType is lmLmm or lmSlm.
Name, Identifier, and Syntax Access Description