Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 34)

22 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002652-02
3
Performance Monitoring of Loss Measurement Objects
mefSoamLmCfgDestMacAddress
1.3.6.1.4.1.15007.1.3.1.2.1.1.13
Syntax: MacAddress Read-create The Target or Destination MAC Address Field to be
transmitted. If mefSoamLmType is lmCcm, the destination
MAC address is always a multicast address indicating the
level of the MEG: 01-80-c2-00-00-3y, where y is the level of
the MEG. An error is returned if this object is set to any other
value.
If mefSoamLmType is lmLmm or lmSlm, the destination
address must be the unicast address of the destination MEP.
An error is returned if this object is set to a multicast
address.
If mefSoamLmType is lm1SlTx, the destination address is
normally the unicast address of the destination MEP, but
may be a multicast address indicating the level of the MEG:
01-80-c2-00-00-3y, where y is the level of the MEG. An error
is returned if this object is set to any other multicast address.
If mefSoamLmType is lm1SlRx, this object is ignored.
This address will be used if the value of the
objectmefSoamLmDestIsMepId is 'false'.
This object is only valid for the entity transmitting the SOAM
LM frames and is ignored by the entity receiving SOAM LM
frames.
mefSoamLmCfgDestMepId
1.3.6.1.4.1.15007.1.3.1.2.1.1.14
Syntax: Dot1agCfmMepIdOrZero Read-create The Maintenance Association End Point Identifier of another
MEP in the same Maintenance Association to which the
SOAM LM frame is to be sent.
This address will be used if the value of the
columnmefSoamLmDestIsMepId is 'true'. A value of zero
means that the destination MEP ID has not been configured.
This object is only valid for the entity transmitting the SOAM
LM frames and is ignored by the entity receiving SOAM LM
frames.
This object can only be written at row creation time.
mefSoamLmCfgDestIsMepId
1.3.6.1.4.1.15007.1.3.1.2.1.1.15
Syntax: TruthValue Read-create A value of 'true' indicates that MEPID of the target MEP is
used forSOAM LM frame transmission. The value 'false' is not
supported.
This object is only valid for the entity transmitting the SOAM
LM frames and is ignored by the entity receiving SOAM LM
frames.This object can only be written at row creation time.
mefSoamLmCfgSourceMacAddress
1.3.6.1.4.1.15007.1.3.1.2.1.1.16
Syntax: MacAddress Read-only The Source MAC Address Field of the received SOAM LM
session PDUs.
If mefSoamLmType is lm1SlRx this object indicates the
source address of the lm1SlTx LM session. This object is only
valid for mefSoamLmType set to lm1SlRx. It is ignored for
mefSoamLmType set to lmLmm, lmSlm, lm1SlTx, or lmCcm.
mefSoamLmCfgStartTimeType
1.3.6.1.4.1.15007.1.3.1.2.1.1.17
Syntax: Integer Read-create This attribute specifies the type of start time of the SOAM LM
session. Only the start time type ‘immediate’ is supported.
The value of immediate starts the SOAM LM session when
the mefSoamLmEnabled is true.
If the written value of the mefSoamLmRelativeStartTime
object is '0' the SOAM LM session starts immediately and the
session operates as if it was set to the immediate mode.
Name, Identifier, and Syntax Access Description