Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 42)

30 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002652-02
3
Performance Monitoring of Delay Measurement Objects
mefSoamDmCfgEnabled
1.3.6.1.4.1.15007.1.3.1.3.1.1.4
Syntax: TruthValue Read-create This attribute specifies whether the Delay Measurement
session is enabled. The value 'true' indicates the Delay
measurement session is enabled. The value 'false' indicates
Delay Measurement session is disabled.
For a Delay Measurement session to be removed, the row
should be deleted in order to release internal resources.
This object can written after row creation time.
If the DM session is enabled it will resume after
shutdown/restart.
When mefSoamDmCfgRowStatus is active, and
mefSoamDmCfgSessionStatus is TRUE, set the node to
FALSE to abort the test.
mefSoamDmCfgCounterEnable
1.3.6.1.4.1.15007.1.3.1.3.1.1.5
Syntax: Bits Read-only A vector of bits that indicates the type of SOAM DM counters
that are enabled.
A bit set to '1' enables the specific SOAM DM counter.
A bit set to '0' disables the SOAM DM counter.
If a particular SOAM DM counter is not supported the BIT
value should be set to '0'.
Only bits 1-3 and 5-7 are supported.
This object can only be written at row creation time.
mefSoamDmCfgInterval
1.3.6.1.4.1.15007.1.3.1.3.1.1.6
Syntax:
MefSoamTcPerfMonIntervalType Read-create This attribute specifies the Performance Monitoring OAM
message transmission period.
For Performance monitoring applications, the default value is
100ms.The range is 1000, 2000, 3000, 4000, 5000 ms.
This object can only be written at row creation time.
mefSoamDmCfgPriority
1.3.6.1.4.1.15007.1.3.1.3.1.1.7
Syntax: Unsigned32 Read-create This attribute specifies the priority of frames with Delay
Measurement OAM message information.
Default: 7
Range: 0-7
mefSoamDmCfgDropEligible
1.3.6.1.4.1.15007.1.3.1.3.1.1.8
Syntax: TruthValue Read-create This attribute specifies the Drop Eligible Indicator of Delay
Measurement OAM frames.
The value 'true' indicates frames are eligible to be discarded.
This is the only supported value.
mefSoamDmCfgFrameSize
1.3.6.1.4.1.15007.1.3.1.3.1.1.9
Syntax: Unsigned32 Read-create This attribute specifies the Delay Measurement frame size.
The range of frame sizes is from 64 through 1518 bytes. The
specified size does not include tag size.
The adjustment to the frame size of the standard frame size
is accomplished by the addition of a Data or Test TLV. A Data
or Test TLV is only added to the frame if the frame size is
greater than 64 bytes.
This object is only valid for the entity transmitting the Delay
Measurement frames (dmDmm, dm1DmTx) and is ignored
by the entity receiving frames.
This object can only be written at row creation time.
Name, Identifier, and Syntax Access Description