Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 83)

Brocade 6910 Ethernet Access Switch MIB Reference 71
53-1002652-02
11
Link Aggregation Group (LAG) table
Link Aggregation Group (LAG) table
fdryLinkAggregationGroupTable
snSwIfInfoFlowControl
brcdIp.1.1.3.3.5.1.20
Syntax: Integer Read-write Indicates if port flow control is enabled:
•
disable(0)
•
enable(1)
Default: enabled(1)
snSwIfInfoGigType
brcdIp.1.1.3.3.5.1.21
Syntax: Integer Read only Applies only to Gigabit Ethernet ports.
Shows the media type for the port:
•
m1000BaseSX(0) – 1-Gbps fiber, with a short wavelength
transceiver
•
m1000BaseLX(1) – 1-Gbps fiber, with a long wavelength
transceiver (3km)
•
m1000BaseTX(5) – 1-Gbps copper (100meter).
•
notApplicable(255) – a non-gigabit port.
snSwIfFastSpanPortEnable
brcdIp.1.1.3.3.5.1.22
Syntax: Integer Read-write Indicates if fast span is enabled on the port.
•
disable(0)
•
enable(1)
snSwIfGBICStatus
brcdIp.1.1.3.3.5.1.27
Syntax: Integer Read only Indicates if the Gigabit port has a GBIC or miniGBIC port:
•
GBIC(1) – GBIC
•
miniGBIC(2) – MiniGBIC
•
empty(3) – GBIC is missing
•
other(4) – Not a removable Gigabit port
snSwIfStatsMacStations
brcdIp.1.1.3.3.5.1.44
Syntax: Integer32 Read only Shows the total number of MAC Stations connected to the
interface.
Name, Identifier, and Syntax Access Description
Name, Identifier, and Syntax Access Description
fdryLinkAggregationGroupTable
brcdIp.1.1.3.33.1.1 N/A The fdryLinkAggregation table.
fdryLinkAggregationGroupEntry
brcdIp.1.1.3.33.1.1.1 N/A An entry of the Link Aggregation table,
fdryLinkAggregationGroupName
brcdIp.1.1.3.33.1.1.1.1
Syntax: DisplayString (Size(1..64)) N/A Displays the name of a LinkAggregationGroup.
fdryLinkAggregationGroupType
brcdIp.1.1.3.33.1.1.1.2
Syntax: Integer Read/create Displays the LinkAggregationGroup type.
Possible Values:
•
static(1)
•
dynamic(2)
fdryLinkAggregationGroupIfList
brcdIp.1.1.3.33.1.1.1.4
Syntax: OctetString Read/create Displays a list of interface indices which are the port
membership of a trunk group. Each interface index is a
32-bit integer in big endian order.
NOTE: This object accepts 32-bit integer only.