Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 75)

Brocade 6910 Ethernet Access Switch MIB Reference 63
53-1002652-02
9
Dynamic Host Configuration Protocol
• fdryDhcpSnoopBindTable: A table that provides the information for DHCP snooping binding
database learned by the device. The DHCP binding database is integrated with the enhanced
ARP table. It contains the information of a DHCP entry, such as IP address, MAC address, type,
state, port, VLAN ID, and lease time. (To be provided at a later date.)
DHCP Snooping global scalar object
One scalar object can clear all entries in the DHCP binding database.
DHCP Snooping VLAN configuration table
Name, Identifier, and Syntax Access Description
fdryDhcpSnoopGlobalClearOper
brcdIp.1.1.3.36.1.1.
Syntax: ClearAction Read-write Determines if all entries in the DHCP database is
cleared:
•
valid(0) - this values is always returned when the
variable is read.
•
clear(1) - clears all entries in the DHCP binding
database.
Name, Identifier, and Syntax Access Description
fdryDhcpSnoopVlanConfigTable
brcdIp.1.1.3.36.2.1 N/A A table controls DHCP Snooping per VLAN. When a
VLAN is created in a device supporting this table, a
corresponding entry of this table will be added.
fdryDhcpSnoopVlanConfigEntry
brcdIp.1.1.3.36.2.1.1 N/A A row in the table. It contains the configuration to either
enable or disable DHCP Snooping on the existing VLAN.
It is indexed by fdryDhcpSnoopVlanVLanId.
fdryDhcpSnoopVlanVLanId
brcdIp.1.1.3.36.2.1.1.1
Syntax: VlanIndex N/A This object indicates the VLAN number on which DHCP
Snooping feature is configured.
fdryDhcpSnoopVlanDhcpSnoopEnable
brcdIp.1.1.3.36.2.1.1.2
Syntax: TruthValue Read-write This object indicates whether DHCP Snooping is
enabled in this VLAN.
If set to “true”, DHCP snooping is enabled.
If set to “false” it is disabled.