Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 44)

32 Brocade 6910 Ethernet Access Switch MIB Reference
53-1002652-02
3
Performance Monitoring of Delay Measurement Objects
Current Statistics for Delay Measurement table
The mefSoamDmCurrentStatsTable contains statistics for the current Delay Measurement interval.
mefSoamDmCfgStopTimeType
1.3.6.1.4.1.15007.1.3.1.3.1.1.21
Syntax: Integer Read-create This attribute specifies the type of stop time to terminate the
SOAM DM session. Only the stop time type ‘relative’ is
supported. The value of relative stops the SOAM DM session
when the session has been active for the time indicated by
mefSoamDmRelativeStopTime.
If the value of the mefSoamDmRelativeStopTime object is '0'
the SOAM DM session stops immediately.
mefSoamDmCfgRelativeStopTime
1.3.6.1.4.1.15007.1.3.1.3.1.1.23
Syntax: TimeInterval Read-only This attribute specifies the relative stop time, from the
session start time, to stop the SOAM DM session.
The value is (mefSoamDmCfgInterval * 5 [default
transmitting count])/10 => unit is 0.01 sec
mefSoamDmCfgSessionStatus
1.3.6.1.4.1.15007.1.3.1.3.1.1.30
Syntax: TruthValue Read-only This object indicates the current status of the DM session. A
value of 'true' indicates the current DM session is active. A
value of 'false' indicates the current DM session is not active,
has not started yet, or is currently in the stopped state
between periods of activity. A session can become inactive
due to it stopping based upon the stop time or the session
being disabled.
mefSoamDmCfgHistoryClear
1.3.6.1.4.1.15007.1.3.1.3.1.1.31
Syntax: TruthValue Read-create This object when written clears the Delay Measurement
history tables (mefSoamDmHistoricStatsTable and
mefSoamDmHistoricStatsBinsTable) - all rows are deleted.
When read the value always returns 'false'. Writing this value
does not change the current stat table, nor any of the items
in the configuration table. Writing this object at row creation
has no effect.
mefSoamDmCfgRowStatus
1.3.6.1.4.1.15007.1.3.1.3.1.1.32
Syntax: RowStatus Read-create The status of the row.
When creating a row, use createAndWait(5), and then read
will show notReady(3).
According to MEF36, the writable columns in a row cannot be
changed if the row is active, except for
mefSoamDmCfgEnabled and mefSoamDmCfgHistoryClear
objects. All columns must have a valid value before a row can
be activated.
Start to transmit DMM/1DM after setting to active.
Name, Identifier, and Syntax Access Description
mefSoamDmCurrentStatsTable
1.3.6.1.4.1.15007.1.3.1.3.3
Syntax: SEQUENCE OF
MefSoamDmCurrentStatsEntry N/A This table contains the results for the current Measurement
Interval in a SOAM Delay Measurement session.
A row in this table is created automatically by the SNMP
Agent when the Delay Measurement session is configured.
Unless otherwise indicated, the objects in this table are
ignored if mefSoamDmType is 1DmTx.
Except for mefSoamDmCurrentStatsIndex and
mefSoamDmCurrentStatsSuspect, each object in this table
applies only if the corresponding bit is set in
mefSoamDmCounterEnable.
The objects in this table are not persistent upon reboot or
restart of a device.
Name, Identifier, and Syntax Access Description