beautypg.com

Software image details – Brocade 6910 Ethernet Access Switch MIB Reference User Manual

Page 58

background image

46

Brocade 6910 Ethernet Access Switch MIB Reference

53-1002652-02

6

Software image

Software image details

The following objects show information about software images in a device. These objects are
available in all devices.

snAgTftpServerAddrType
brcdIp.1.1.2.1.65
Syntax: InetAddressType

Read-write

Shows the IP address type of the TFTP server that will be used to
download and upload image and configuration files. Supported
address types are:

ipv4(1)

ipv6(2)

ipv6z(4)

Default: IPv4

snAgTftpServerAddr
brcdIp.1.1.2.1.66
Syntax: InetAddress

Read-write

Shows the IP address of the TFTP server that will be used to
download and upload image and configuration files.

Name, Identifier, and Syntax

Access

Description

snAgImgVer
brcdIp.1.1.2.1.11
Syntax: DisplayString

Read-only

Shows the version of the running software. The software image
file name is displayed in the format:
major.0.minor.maintenance
It can have up to 32 characters.

snAgSoftwareFeature
brcdIp.1.1.2.1.41
Syntax: OctetString

Read-only

A bit string representing the software feature of the running
switch/router image. Each bit can have one of the following
values:

0 – The feature is not available

1 – The feature is available

Bit 0 is the least significant bit of an octet, and bit 7 is the most
significant bit of an octet.

Octet 0, bit 0 – RMON

Octet 0, bit 1 – IPX switching

Octet 0, bit 2 – Server Load Balancing

Octet 0, bit 3 – Layer 3 filter in switch

Octet 0, bit 4 – IPX routing

Octet 0, bit 5 – AppleTalk routing

Octet 0, bit 6 – IP multicast routing

Octet 0, bit 7 – Local access control

Octet 1, bit 0 – BGP routing

Octet 1, bit 1 – Loopback interface

Octet 1, bit 2 – BigIron multi-management module

Octet 1, bit 3 – BigIron SYSIF II

Octet 1, bit 4 – BigIron POS support

Octet 1, bit 5 – AppleTalk cable VLAN

Octet 1, bit 6 – 64 subnet

Octet 1, bit 7 – multi-slot trunk

Octet 2, bit 0 – TACACS

Octet 2, bit 1 – Gigabit Ethernet port auto-negotiation mode

Octet 2, bit 2 – FSRP

Octet 2, bit 3 – Exodus requested OSPF enhancement

Octet 2, bit 4 – OSPF NSSA

Octet 2, bit 5 – POS

Name, Identifier, and Syntax

Access

Description