Brocade 6910 Ethernet Access Switch MIB Reference - Manual (Page 43)

Brocade 6910 Ethernet Access Switch MIB Reference 31
53-1002652-02
3
Performance Monitoring of Delay Measurement Objects
mefSoamDmCfgDestMacAddress
1.3.6.1.4.1.15007.1.3.1.3.1.1.14
Syntax: MacAddress Read-create The Target or Destination MAC Address Field to be
transmitted.
If mefSoamDmType is dmDmm, the destination address
must be the unicast address of the destination MEP. An error
is returned if this object is set to a multicast address.
If mefSoamDmType is dm1DmTx, the destination address is
normally the unicast address of the destination MEP, but
may be a multicast address indicating the level of the MEG:
01-80-c2-00-00-3y, where y is the level of the MEG. An error
is returned if this object is set to any other multicast address.
If mefSoamDmType is dm1DmRx, this object is ignored.
This address will be used if the value of the
objectmefSoamDmDestIsMepId is 'false'.
This object is only valid for the entity transmitting the SOAM
DM frames and is ignored by the entity receiving SOAM DM
frames.
This object can only be written at row creation time.
mefSoamDmCfgDestMepId
1.3.6.1.4.1.15007.1.3.1.3.1.1.15
Syntax: Unsigned32 Read-create The Maintenance Association End Point Identifier of another
MEP in the same Maintenance Association to which the
SOAM DM frame is to be sent.
This address will be used if the value of the column
mefSoamDmDestIsMepId is 'true'. A value of zero means
that the destination MEP ID has not been configured.
This object is only valid for the entity transmitting the SOAM
DM frames and is ignored by the entity receiving SOAM DM
frames.
This object can only be written at row creation time.
mefSoamDmCfgDestIsMepId
1.3.6.1.4.1.15007.1.3.1.3.1.1.16
Syntax: TruthValue Read-create A value of 'true' indicates that MEPID of the target MEP is
used for SOAM DM frame transmission.
A value of 'false' indicates that the destination MAC address
of the target MEP is used for SOAM DM frame transmission.
This object is only valid for the entity transmitting the SOAM
DM frames and is ignored by the entity receiving SOAM DM
frames.
This object can only be written at row creation time.
mefSoamDmCfgSourceMacAddres
s
1.3.6.1.4.1.15007.1.3.1.3.1.1.17
Syntax: MacAddress Read-only The Source MAC Address Field of the received SOAM DM
session PDUs.
If mefSoamDmType is dm1DmRx this object indicates the
source address of the dm1DmTx DM session.
This object is only valid for mefSoamDmType set to
dm1DmRx. It is ignored for mefSoamDmType set to dmDmm
or dm1DmTx.
mefSoamDmCfgStartTimeType
1.3.6.1.4.1.15007.1.3.1.3.1.1.18
Syntax: Integer Read-create This attribute specifies the type of start time of the SOAM DM
session. Only the start time type ‘immediate’ is supported.
The value of immediate starts the SOAM DM session when
the mefSoamDmEnabled is true. If the written value of the
mefSoamDmRelativeStartTime object is '0' the SOAM DM
session starts immediately and the session operates as if it
was set to the immediate mode.
Name, Identifier, and Syntax Access Description