beautypg.com

Safety notices, Danger notices – Brocade VDX 8770-8 QuickStart Guide User Manual

Page 5

background image

Brocade VDX 8770-8 QuickStart Guide

5 of 34

Publication Number: 53-1002555-01

CAUTION
The Brocade VDX 8770-8 with DC power sources are intended for installation in restricted access areas
only. A restricted access area is a location where access can be gained only by service personnel through
the use of a special tool, lock and key, or other means of security, and is controlled by the authority
responsible for the location.

CAUTION
The Brocade VDX 8770-8 with AC power sources are intended for installation in restricted access areas
only. A restricted access area is a location where access can be gained only by service personnel through
the use of a special tool, lock and key, or other means of security.

Safety notices

When using this product, observe the danger, caution, and attention notices in this manual. The notices are
accompanied by symbols that represent the severity of the safety condition.

NOTE

Translated safety notices are in the Brocade Product Safety Notices publication, which is on the CD-ROM that
accompanies this product.

The danger and caution notices are listed in numerical order based on their IDs, which are displayed in parentheses,
for example (D004), at the end of each notice. Use this ID to locate the translations of these danger and caution
notices in the Brocade Product Safety Notices.

Danger notices

A danger notice calls attention to a situation that is potentially lethal or extremely hazardous to people. A
lightning bolt symbol accompanies a danger notice to represent a dangerous electrical condition. Read and
comply with the following danger notice before installing or servicing this device.

DANGER

Use the supplied power cords. Ensure the facility power receptacle is the correct type, supplies the
required voltage, and is properly grounded. (D004)

Installing transceivers as needed

30-60 minutes

Copper and optical transceivers and
direct-attach cables as needed.

Attaching cables, cable ties, and cable
guides

2-3 hours

Cables, cable ties, and cable comb.

TABLE 1

Installation tasks, time, and items required (Continued)

Installation task

Time estimate

Items required