Brocade VDX 8770-8 QuickStart Guide - Manual (Page 14)

14 of 34 Brocade VDX 8770-8 QuickStart Guide
Publication Number: 53-1002555-01
NOTE
The Brocade VDX 8770-8 packaging incorporates a wood pallet and brackets. The switch sits on top of a
corrugated cardboard shipping tray.
c. Save the packing materials for use when returning a switch.
d. Leave the switch on top of the shipping tray and pallet if the switch must be transported to the installation
location.
2. Use a pallet jack or other assisted lift to transport the new switch to the installation area.
3. Using the rack mount instructions, install the rack components in the rack and mounting flanges on the switch.
The rack mount kit and instructions are shipped separately from the switch.
4. Remove the accessory kit (cardboard box), packing foam, and antistatic plastic from the switch and set them
aside.
5. Remove the foam inserts around the base of the switch.
6. Use a lift to raise the switch to the correct level. If installing the switch in a rack, follow the instructions provided
by the rack kit manufacturer.
7. If applicable, lock the wheels of the lift.
8. Ensure that the switch is oriented so that the port side (front) has access to intake air.
9. Gently slide the switch onto the final installation surface, ensuring that it remains supported during the transfer.
10. Before you apply power to the switch, you can install the MM, SFM, and line card modules as well as power
supplies to speed up your installation. Refer to the following tasks for information on inserting thet various
modules.
Port numbering
The Brocade VDX 8770-8 uses the following port numbering method: